Skip to content
Call: +44207 1250071 Email: info@epicuro.co.uk
Epicuro Surface Reviver

Epicuro Surface Reviver

Epicuro Surface Reviver is a high-performance cleaner designed to remove black spots, organic and microbiological contaminants from porous surfaces such as stone, block paving and concrete - returning them to their ‘as-new’ condition.

£43.75 - £43.75
£43.75
£43.75 - £43.75
£43.75
What can Epicuro Surface Reviver be used for?

For porous surfaces, such as stone, block paving and concrete.

What are the key features and benefits?
  • Powerful and effective cleaner for stubborn areas of lichen and algae. 
  • Cleans previously impossible staining. 
  • Highly efficient & cost effective. 
  • Extracts organic soiling from the surface. 
  • Fast acting product. 
  • Low odour, biodegradable, solvent & acid free.
Download TDS

See separate Health & Safety Data Sheet (MSDS) for full and safety instructions.

  • Eye protection: wear protective goggles. Ensure eye bath is to hand.
  • Hand protection: Wear protective gloves.
  • Skin protection: Wear protective overalls.
  • In the event of ingestion: do not induce vomiting. Contact a doctor or a specialist.
  • Respiratory protection: Under normal conditions of use, where adequate ventilation is available, no special respiratory protection equipment is needed.

Where required, product users are responsible for preparing their own COSHH Assessments based on the Material Safety Data Sheets (MSDS) provided by Epicuro for its products.

KEEP OUT OF THE REACH OF CHILDREN

Physical state at 20oC: Liquid

Colour: Off-white

Odour: Perceptible Odour

PH: >11.5

Specific Gravity: 1.02

Coverage: 3-5m2 per litre

Shelf-life: 24 months from DOM

SURFACE PREPARATION:

  • Ensure surface is free from loose dirt, moss, and other debris.
  • Test the product on target area before wide scale use, especially if the surface material is unknown.
  • Protect adjoining areas not intended to be cleaned from overspray or spillage.

APPLICATION:

  • Apply Epicuro Surface Reviver evenly to a damp (not wet) surface, by roller, brush or low-pressure sprayer.
  • Saturate the surface with a generous, even, coat and agitate with stiff brush.
  • Allow Epicuro Surface Reviver time to work, penetrating the surface and removing the contamination. The dwell time will depend on the substrate, thickness, type of contamination and the concentration of product used.
  • Test a small area to determine the time required before completing the project. A minimum dwell time of 60 minutes is advised, but Epicuro Surface Reviver can be left in-situ for up to 24 hours if required for extreme soiling. 
  • Rinse with high pressure washer or running water and a stiff brush.  

Product Overview

Epicuro Surface Reviver is a high-performance cleaner designed to remove black spots, organic and microbiological contaminants from porous surfaces such as stone, block paving and concrete - returning them to their ‘as-new’ condition.

Epicuro Surface Reviver is a powerful and effective cleaner for stubborn areas of lichen and algae growth as well as organic stains (e.g. fruit). 

Epicuro Surface Reviver is a fast-acting answer to surface cleaning, quickly lifting contamination from the surface without the need for heavy scrubbing or power washing.

Epicuro Surface Reviver is biodegradable, it does not contain solvents and is acid free. 

Epicuro Surface Reviver is used to clean areas subject to high levels of foot traffic and other sources of dirt and contamination. Examples of use are high streets, public squares, around monuments, parks and out-door seating areas of restaurants and coffee shops.

Key Information

How does Epicuro Surface Reviver perform?

Epicuro Surface Reviver is a penetrating cleaner for stone, block paving, concrete and other porous surfaces, extracting normally impossible staining, e.g. lichen, algae and other organic soiling. 

What's the environmental impact of Epicuro Surface Reviver?

Biodegradable, solvent & acid free.

What is the packaging and storage?

5 litre container

What are the coverage stats for Epicuro Surface Reviver?

Coverage of Epicuro Surface Reviver depends on the type of substrate and the nature of the contamination. 

What are the application guidelines for Epicuro Surface Reviver?

Apply by roller, brush or HVLP spray unit.

Important Notice

The content of this documentation is based on our experience of the product. Epicuro Protective Materials Ltd guarantees the quality of its products, but expressly declines any liability in the event of failure by the user to comply with the recommendations and conditions of use of said products, notably but not exclusively in the event of incorrect application, application by unqualified personnel, use of products not compatible with Epicuro’s products or bad weather conditions. For further information, refer to the safety data sheet.